40% Complete

Part 3: Install

When you first slot your SSD into the storage drive bay, it might not fit securely. If this occurs, here’s what to do based on the type of system you’re installing into.

For Laptops:

Look closely at the old storage drive you removed for any brackets, adapters, support frames, braces, pull tabs, or screws that might be attached to it. If anything is attached to the old drive, remove it and put it on the SSD in the same manner. Now reinsert the SSD into the storage bay. 


For Laptops (spacer):

If it still doesn’t fit snug, use the spacer you set aside earlier and attach it to the SSD by peeling off the adhesive and sticking it onto the drive as shown. Attaching the spacer allows the SSD to achieve the same level of thickness as the existing drive you removed. Note: many installations don’t require the spacer, so you may not need to use it.

For Desktops:

Some storage bays and existing hard drives are significantly larger than a standard size SSD. If this is the case in your system, you’ll need a 2.5-inch to 3.5-inch converter to make the SSD fit snug.

If you can use a screwdriver, you can install an SSD. While the inside of your computer looks scary and foreign, there’s nothing to fear. As long as you’ve grounded yourself, you’ve eliminated most of the risk that comes with accidentally touching components. Electricity is naturally present in the human body, but when you ground yourself, you get rid of it and make it safe to touch your system’s parts. No need to fear – you’re never in danger during the process and the electricity in your body is natural and can’t hurt you.


We're sorry, but there is not enough quantity in stock to complete this order